Agilent P-Series Firmware Revision History P-Series Firmware Revision History free download

File name P-Series_Firmware_Revision_History P-Series Firmware Revision History.txt

P-Series Power Meter Firmware Revision History ---------------------------------------------- Release A.05.06 (5-Sept-2013): Enhancement: - Added Run/Stop indication in CCDF table - Added QR code linking to learnware support Bugs fixed: - Resolved power drop issue while performing frequency sweep measurement - Resolded display issue of having two fields hightlighted at once in state save/ recall menu - Allows changing of trace display from window size to full screen using SCPI command - Allows user to get out of CCDF trace display using SCPI command - Resolved E9300H/ 1H high offset error upon 0dBm calibration - Resolved N1913A TCP socket connection issue - Enable TCP Keep alive value option - Resolved issue of unable to accept new connection after many LAN restart - Resolved trace jitter with EXT trigger Release A.05.05 (12-Nov-2012): Enhancement: - Added ability to change telnet port number via new diag:DIAG:SYSTem:COMM:TELNet:PORT - Default is 23 upon power up. The port number configured using this diag will not be affected by SYST:PRES DEF or *RST. Upon invoking the above diag, network will be restarted to reconfigure to the new telnet port. The process of restarting network will take approximately 20 seconds. - Implemented long sensor cable support - Enhance the CCDF trace setting recall upon preset or power cycle Bugs fixed: - Resolved trace display frozen - Resolved improper power conversion for Y scale under Trace display mode - Resolved E4412A sensor error measurement after zero and calibration with power reference on Release A.05.04 (9-Apr-2010): Enhancement: added new flash file system to provide compatibility on the new processor board (P1002). Release A.05.03 (7-Jan-2010): Enhancement: - New preset for LTE. Bugs fixed: - Resolved linearity type selection inconsistency. - Resolved missing trigger output signal in fast mode. - Resolved measurement inaccuracy for GSM signal. - Resolved zeroing error with N848x CFT sensor. Release A.05.02 (6-May-2009): Enhancement: - Compatible with N8480 power sensors including Q band, R band, B model and H model. - Enable external triggering in Peak measurement mode. Release A.05.01 (1-Sep-2008): Bugs fixed: - Resolved issue where inaccurate average power measurement is obtained when power/frequency sweep in FAST mode and hardware triggering is used - Resolved negative slope trigger - Resolved the inability to use greater than 100 feet 11730A sensor cable Enhancement: - Compatible with N8480 power sensors including CFT option. Release A.04.01 (23-Oct-2007): More enhancement features with the latest firmware release: - LXI-C compliance - Enable hardware triggering for average power measurement * Enable external triggering in CW measurement mode * FW implementation to meet the 2048 buffer size memory requirement to store the measured readings up to 2048 * Assert